6ES7321-1EH00-0AA0

Siemens 6ES7321-1EH00-0AA0 S7-300 SM 321 Digital Input Module

Siemens 6ES7321-1EH00-0AA0 is an SM 321 module with 16 digital inputs for the SIMATIC S7-300 family. It detects nominal 120 V AC input signals and transfers binary field status information to the PLC program. It can be considered among the S7-300 digital input modules when replacing an installed unit with this order number or preparing a maintenance spare.

120 V AC field signals

The key selection criterion is the module’s nominal 120 V AC input voltage. The voltage and contact ratings of connected pushbuttons, limit switches and other contact devices must suit the circuit. Check the cabinet supply voltage separately from the signal voltage applied to each input terminal.

When assessing an inductive sensor or photoelectric sensor, examine its output type, operating voltage and off-state current. An AC supply rating on the sensor alone does not establish direct output compatibility with this module. Base the connection decision on both the sensor documentation and module data covering the EH00 version.

Wiring and hardware configuration

Compare the front connector’s channel, common and neutral connections with the existing cabinet drawings. Record wire labels and the module wiring diagram before replacement. Confirm whether the front connector, cover and rear bus connector are included with the actual offered unit.

Check the installed S7-300 CPU, module slot, input start address and programmed channel assignments. The status of sixteen digital inputs corresponds to two bytes; obtain the actual input addresses from the existing STEP 7 hardware configuration. Match the complete nameplate code to the module entry in the project.

Distinguishing EH00, EH01 and FH00 versions

The Siemens SIMATIC module list dated 23 August 2021 identifies 6ES7321-1EH01-0AA0 as the successor order number for EH00. This does not remove the need to check the installed wiring and project before replacement. Verify the hardware version and the functions required by the station separately.

6ES7321-1FH00-0AA0 is a different order number with 120/230 V AC inputs. The FH00 model’s 230 V AC input capability must not be assumed for EH00. Likewise, do not transfer input delay, current consumption or signal thresholds from another version without documentation covering this model.

Editor’s note: module replacement in ET 200M

The exception table in section 8.5 of the Siemens ET 200M manual lists 6ES7321-1EH00-0AA0 among the modules that do not support module replacement during operation. An ET 200M interface or active bus arrangement supporting this function does not remove the EH00 restriction. Plan replacement around stopping the station and de-energizing the relevant circuits.

Evaluating a used module

Inspect the nameplate, hardware revision, terminal socket, cover, latches and rear connections. Check for corrosion, heat damage and signs of previous repair. Functional assessment should test all 16 inputs individually using a suitable protected test setup and compare the applied signal with the input state read by the PLC. The test scope and results must relate to the actual offered unit.

Provide the complete product code, required quantity and a photograph of the installed module’s nameplate when requesting a quotation. Confirm the physical condition, included accessories and any available test record for the specific unit.

PDF files and manufacturer references

Visit the S7-300 PDF files section for station documentation. Check the scope of older manufacturer documents for the EH00 version. A current manual covering a different version alone does not establish equivalence.

Manufacturer references: Archived Siemens ET 200M manual, section 8.5 | Siemens SIMATIC module and successor list, page 24.

Related topics and product groups

Siemens S7-300 | Digital input modules | Digital output modules | Analog modules

CPU modules | Siemens S7 PLC | PLCs and modules | ET 200 systems

Used PLC power supplies | Sensors | Sensor connectors | S7-300 PDF files

Used Siemens equipment | Used automation equipment | 6ES7321-1FH00-0AA0 | 6ES7321-1FF01-0AA0