6ES7321-1BP00-0AA0
6ES7321-1BP00-0AA0 Siemens SM 321 64-Channel 24 V DC Digital Input Module
6ES7321-1BP00-0AA0 is an SM 321 module in the Siemens SIMATIC S7-300 family with 64 digital inputs, a 24 V DC rating and sinking/sourcing inputs. Inputs form four isolated groups of 16. When consolidating field signals into one module in a PLC application, assess connection accessories, CPU support and simultaneous input limits together.
Two terminal blocks and connecting cables
Field wiring uses two 40-pin terminal blocks and two suitable connecting cables. Terminal options are 6ES7392-1AN00-0AA0 with screw terminals and 6ES7392-1BN00-0AA0 with spring clamps. Select the required length from the 6ES7392-4Bxx0-0AA0 cable family; this notation is not a complete order number. Confirm separately whether cables and terminal blocks are included in the delivery.
Sink/source operation and sensor selection
The digital inputs support sinking or sourcing operation with the appropriate COM connections. Check the PNP/NPN field circuit and group common terminals against the Siemens wiring diagram. Two-wire sensors are not supported. Isolation is provided between groups; do not assume that every channel within a group is individually isolated.
Input delay and status indication
Input delay is 1.2–4.8 ms in either transition direction; typical current in the “1” state is 4.2 mA. Green channel LEDs are provided, but there are no diagnostic functions, wire-break diagnostics or hardware interrupts. The “3 ms” catalog description must not be treated as a guaranteed maximum delay.
STEP 7, CPU compatibility and addressing
The module occupies 8 input bytes, from x to x+7 when x is the start byte. Siemens specifies HSP 2019 V1.0 for STEP 7 integration; 2019 is the HSP identifier. Compare the selected CPU and, for ET 200M installations, the IM 153 version against the manufacturer’s compatibility tables. Do not assume the station is ready to operate before its configuration has been loaded.
Used-unit checks and model identification
Inspect the label, connector pins, cable locks and terminal blocks. Request test information showing that every channel responds correctly to applied and removed signals in the intended sink/source arrangement. Testing should cover the common connections of all four groups and both cables. 6ES7322-1BP00-0AA0 is a similarly numbered digital output module and must not be confused with this SM 321 input module.
PDF files and manufacturer sources
Use the S7-300 PDF files section to locate relevant documents. Refer to section 3.6 of the Siemens S7-300 module manual for wiring, temperature limits and addressing, and the 6ES7321-1BP00-0AA0 CPU compatibility supplement for CPU selection. Specify the complete module number, cable lengths and terminal type together when ordering.
Related topics and navigation
S7-300 main page | Digital input modules | Digital output modules | S7-300 CPU modules
Analog modules | Special and function modules | S7-300 PDF files | S7-300 memory cards
Siemens SIMATIC S7 | Siemens S7 PLC range | Used Siemens products | PLCs and accessories
HMI operator panels | PLC and HMI | Second-hand main page | OtomasyonAVM home