6ES7314-1AE04-0AB0

6ES7314-1AE04-0AB0 Siemens CPU 314 24 KB PLC CPU

6ES7314-1AE04-0AB0 is a standard CPU 314 processor with 24 KB of working memory in the Siemens SIMATIC S7-300 family. When selecting it for an existing PLC system, check the complete order number, program memory requirements, MPI connection, installed modules and project backup together.

CPU role and I/O arrangement

This version has no integrated digital or analog field I/O. Field signals are handled through the system’s digital input, digital output and analog modules. When replacing the CPU, match module order, addresses and parameters to the existing hardware configuration.

Working memory and load memory

Working memory is 24 KB RAM and cannot be expanded. Integrated load memory is 40 KB RAM; load memory can be expanded with a suitable FEPROM card up to 4 MB. A larger card does not increase the 24 KB working memory available for program execution.

Select a memory card by its complete order number. Assess the installed card and battery condition against the program’s data retention requirements. Battery-backed retention and the data areas retained without a battery have different coverage. Back up the program and parameters before replacement.

MPI communication and program compatibility

The MPI interface supports 19.2 and 187.5 kbit/s. The CPU has no integrated PROFIBUS DP master/slave interface. If the existing system uses DP communication, check the installed CP module and project settings separately. Match the exact CPU version, MPI address and operator panel connection in the STEP 7 project.

The data sheet specifies a typical bit operation time of 0.3 µs. This is not the cycle time of the complete program; cycle time depends on program structure, the instructions used and communication load.

Supply and physical dimensions

The rated supply is 24 V DC, with a permissible range of 20.4–28.8 V DC. Assess the CPU and other system loads together when selecting the 24 V DC power supply. Width × height × depth: 80 × 125 × 130 mm. For a used unit, inspect the label, terminals, mode selector, MPI socket and diagnostic records.

PDF files and manuals

Visit the S7-300 PDF files section for technical documentation. Match order number 6ES7314-1AE04-0AB0 and the CPU 314, 24 KB designation when selecting the relevant manual.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home