6ES7313-6CF03-0AB0

Siemens 6ES7313-6CF03-0AB0 — S7-300 CPU 313C-2 DP, 64 kB

6ES7313-6CF03-0AB0 is a CPU 313C-2 DP compact processor in the Siemens SIMATIC S7 PLC family. It features 64 kB of work memory, 16 digital inputs and 16 digital outputs, MPI and an integrated PROFIBUS DP interface. When selecting S7-300 CPU modules, consider memory capacity, field connections and the existing project's communication architecture together.

Digital I/O and high-speed counters

The CPU's integrated digital I/O allows compatible field signals to connect directly. This model has no integrated analog inputs or outputs. Select suitable S7-300 analog modules separately when analog measurement or control is required.

Three high-speed counters support counting applications at up to 30 kHz. Before connecting an encoder or pulse signal, check the sensor's electrical output, counter operating mode and terminal assignments. Plan inputs allocated to high-speed counting together with the project's standard digital input requirements.

MPI and PROFIBUS DP communication

The MPI interface supports up to 187.5 kbit/s, while the separate PROFIBUS DP interface supports up to 12 Mbit/s. The DP interface can operate as a master or slave. The CPU has no integrated PROFINET port.

For distributed I/O stations such as Siemens ET200, verify the PROFIBUS interface, station addresses, GSD file and data areas against the project. When choosing between CPU 313C-2 DP and CPU 313C-2 PtP, compare the purpose of the second communication interface carefully.

MMC and front connector requirements

A SIMATIC Micro Memory Card (MMC) is required for operation. The 64 kB work memory cannot be expanded; load memory supports an MMC of up to 8 MB. A larger card does not increase the CPU's work memory.

The integrated field connections require one 40-pole front connector. When purchasing the CPU, confirm whether the MMC, front connector and other PLC accessories are included. Also check the program contents and access status of any existing card.

Power supply and system compatibility

The nominal supply is 24 V DC, with a permissible range of 20.4–28.8 V DC. When selecting a power supply, calculate the combined requirements of the CPU, expansion modules and field loads connected to the outputs.

The STEP 7 hardware configuration must match the CPU order number and firmware version. Before replacement, compare the program backup, I/O addresses, counter parameters and PROFIBUS configuration. Different memory and hardware versions within the same CPU family should not automatically be treated as interchangeable.

PDF files and technical reference

Browse the S7-300 PDF files for installation and wiring documentation. Manufacturer reference: Siemens 6ES7313-6CF03-0AB0 product information.

Related topics and product groups

S7-300 CPU modules · Siemens S7 PLC products · PLCs and accessories · S7-300 analog modules · Siemens ET200 · Used PLC power supplies · Used products · OtomasyonAVM home