6ES7313-6CE01-0AB0
Siemens 6ES7313-6CE01-0AB0 – S7-300 CPU 313C-2 DP, 16 DI/16 DO
Siemens 6ES7313-6CE01-0AB0 is a CPU 313C-2 DP compact processor in the SIMATIC S7-300 family with 32 KB of work memory and 16 digital inputs / 16 digital outputs. It features a 24 V DC supply, MPI and an integrated PROFIBUS DP interface. Selection for an existing Siemens S7 PLC system should consider the complete model code, memory requirements, I/O wiring, communication setup and program compatibility.
MPI and PROFIBUS DP connections
MPI provides programming and online access, while the PROFIBUS DP interface can operate as a DP master or DP slave, depending on configuration. During replacement, compare the station address, baud rate, network role and data areas with the existing project. When comparing S7-300 CPU models, the front-panel family name alone is insufficient. Establishing an MPI connection does not verify data exchange on the PROFIBUS network.
High-speed counters and field wiring
The CPU provides three 30 kHz high-speed counters. When selecting a suitable encoder or pulse source, check electrical compatibility, pulse frequency and counting mode. Field wiring requires one 40-pin front connector. Verify counter terminal assignments against the CPU wiring diagram rather than assuming ordinary digital-input assignments apply.
MMC and work memory
A SIMATIC Micro Memory Card (MMC) is required for operation. The MMC provides load memory; the 32 KB work memory is a separate capacity. Installing a larger MMC does not increase work memory. Confirm card capacity, compatibility and inclusion in delivery. Back up the STEP 7 project, program and required operating data before replacing the CPU.
Selecting a used CPU
Check all 16 inputs and 16 outputs individually in a suitable test setup. Test the required high-speed counters and DP communication separately, and identify the functions verified. Inspect the label, firmware version, MMC slot, front-connector contacts and communication ports. A RUN LED does not prove that every I/O channel and counter is functional. State clearly whether the MMC and front connector are included.
PDF files and technical references
For documentation, visit the S7-300 PDF files section. Manufacturer references: Siemens 6ES7313-6CE01-0AB0 product record and Siemens S7-300 memory concept document. Base wiring and parameter selection on information covering the 6CE01 version.
Related topics and product groups
S7-300 CPU modules | S7-300 main page | Encoders | Siemens S7 PLC products
Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home