6ES7313-6BF03-0AB0

6ES7313-6BF03-0AB0 Siemens CPU 313C-2 PtP Compact PLC

6ES7313-6BF03-0AB0 is a CPU 313C-2 PtP compact processor with 64 KB working memory, integrated digital I/O and serial communication in the Siemens SIMATIC S7-300 family. For an existing PLC system, check the complete order number, serial protocol, I/O requirements, program size and memory card compatibility together.

MPI and PtP serial communication

The first interface is MPI, while the second provides RS-422/485 PtP communication. Integrated serial protocol drivers support ASCII and 3964(R). Maximum serial rates are 38.4 kbit/s in half-duplex and 19.2 kbit/s in full-duplex operation.

There is no integrated PROFIBUS DP or PROFINET interface. An RS-485 port on the connected device does not establish compatibility by itself. Match the protocol, data format, baud rate, wiring and program send/receive blocks. Record the working serial communication settings before replacement.

Digital I/O and high-speed counters

The CPU provides 16 digital inputs rated at 24 V DC and 16 digital outputs. Transistor outputs have a rated current of 0.5 A per channel. When connecting suitable sensors and contact signals, also assess output group current limits, cabinet temperature and mounting orientation.

Three 30 kHz high-speed counters support pulse and encoder applications. Match counter input assignments and signal levels to the project. Account separately for I/O points assigned to technology functions when planning general-purpose I/O usage.

There is no integrated analog I/O. Analog measurement or reference signals require suitable S7-300 analog modules. The integrated digital I/O uses one 40-pin front connector.

Memory and project compatibility

The 64 KB working memory cannot be expanded. A compatible SIMATIC Micro Memory Card (MMC) is required for operation. Keep memory card capacity separate from working memory. Check the STEP 7 hardware definition and installed firmware, and back up the existing program, parameters and serial communication blocks.

Supply, dimensions and used-unit checks

The 24 V DC supply has an allowable range of 20.4–28.8 V DC. Include the CPU and field loads in power supply sizing. Width × height × depth: 120 × 125 × 130 mm. For a used unit, inspect the serial port, I/O channels and connectors; separately confirm whether the MMC and front connector are included.

PDF files and manuals

Use the S7-300 PDF files section for technical documentation. Match order number 6ES7313-6BF03-0AB0 and the CPU 313C-2 PtP designation when selecting wiring and parameterization instructions.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home