6ES7313-5BF03-0AB0
Siemens 6ES7313-5BF03-0AB0 — S7-300 CPU 313C, 64 kB
6ES7313-5BF03-0AB0 is a CPU 313C compact processor in the Siemens SIMATIC S7 PLC family. It combines 64 kB of work memory, 24 digital inputs and 16 digital outputs, analog channels and an MPI interface in one unit. When selecting an S7-300 CPU module, check the complete order number, channel requirements, sensor connections and existing program compatibility together.
Analog channels and Pt100 input
The integrated analog section provides 4 analog inputs, 2 analog outputs and 1 Pt100 temperature input. Treat the Pt100 channel separately from the four general analog inputs. Match the connected sensor or drive signal to the channel parameters and terminal diagram.
For analog wiring, check the measurement range, shielding and reference potential. The program's scaling must also match the selected signal range. Suitable S7-300 analog modules can be considered when additional channels are required.
Digital I/O and high-speed counters
Alongside its 24 DI / 16 DO, the CPU provides three 30 kHz high-speed counters. For encoder or pulse sensor applications, compare electrical signal compatibility, counter mode and terminal assignments. Plan inputs allocated to counting functions together with standard digital input requirements.
MPI communication and networking
The MPI interface supports communication at up to 187.5 kbit/s. For a compatible programming device or operator panel, match the MPI address, transmission rate and adapter settings to the project.
The CPU has no integrated PROFIBUS DP or PROFINET interface. For distributed I/O systems such as Siemens ET200, select the required communication module and protocol support separately. When comparing CPU 313C, CPU 313C-2 DP and CPU 313C-2 PtP models, examine both their communication interfaces and integrated I/O.
MMC and front connectors
A SIMATIC Micro Memory Card (MMC) is required for operation. The 64 kB work memory cannot be expanded; load memory supports an MMC of up to 8 MB. Card capacity and work memory capacity are different specifications.
Field wiring requires two 40-pole front connectors. When purchasing the CPU, confirm whether the MMC, connectors and other PLC accessories are included. Check connector terminal condition and existing wiring labels as well.
Power supply and CPU replacement
The nominal supply is 24 V DC, with a permissible range of 20.4–28.8 V DC. Select the power supply according to the combined requirements of the CPU, expansion modules and field loads.
The STEP 7 hardware configuration must match the CPU order number and firmware version. Before replacement, back up the program and data blocks, then compare digital addresses, analog channel settings, the Pt100 connection and counter parameters.
PDF files and technical reference
Browse the S7-300 PDF files for installation and wiring documentation. Manufacturer reference: Siemens 6ES7313-5BF03-0AB0 product information.
Related topics and product groups
S7-300 CPU modules · Siemens S7 PLC products · PLCs and accessories · S7-300 analog modules · Siemens ET200 · Used PLC power supplies · Used products · OtomasyonAVM home