6ES7307-1EA01-0AA0
Siemens 6ES7307-1EA01-0AA0 – S7-300 PS 307, 24 V DC / 5 A
Siemens 6ES7307-1EA01-0AA0 is a PS 307 regulated power supply for SIMATIC S7-300 systems. It converts 120/230 V AC single-phase input into 24 V DC / 5 A output. Rated output power is 120 W, calculated as 24 V × 5 A. For an existing Siemens S7 PLC system, check the complete model code, input voltage, total load current, mounting space and wiring arrangement.
120/230 V AC input and automatic selection
This version provides automatic input range switching. Specified operating ranges are 85–132 V AC and 170–264 V AC, with a nominal frequency of 50/60 Hz. These are separate voltage ranges. During replacement, follow the unit’s terminal markings and wiring diagram rather than copying cable positions from the previous supply.
24 V DC load calculation
Add the consumption of connected S7-300 CPU modules, external module supplies and field devices on the same circuit. Include startup demand and simultaneous switching loads. The output is short-circuit protected and suitable for no-load operation. Protection does not justify continuous overloading.
Mounting and cabinet conditions
The unit mounts on an S7-300 rail. Siemens specifies vertical installation with terminals below and at least 40 mm clearance above and below. Operating ambient temperature is 0…+60 °C; protection rating is IP20. Check cabinet temperature, airflow, protective earthing and mains protection. Qualified personnel should perform installation and maintenance with power disconnected.
Load testing a used supply
When assessing a used PLC power supply, inspect terminals, heat damage, covers and mounting parts. A no-load 24 V reading or green LED does not establish adequate output under load. A controlled test should assess output voltage, ripple, heating and stability. State the test current, duration and included connection parts.
PDF files and technical references
Visit the S7-300 PDF files section. Manufacturer references: Siemens 6ES7307-1EA01-0AA0 product record and Siemens PS 307 operating instructions. Base selection on specifications for the 1EA01 version.
Related topics and product groups
Used PLC power supplies | S7-300 main page | S7-300 CPU modules | Siemens S7 PLC products
Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home