6ES7338-4BC00-0AB0
6ES7338-4BC00-0AB0 Siemens SM 338 SSI Position Input Module
6ES7338-4BC00-0AB0 is the SM 338 POS-INPUT position input module in the Siemens SIMATIC S7-300 family. It provides three SSI absolute encoder channels, two FREEZE inputs and a 20-pin front connector. Check the complete order number, encoder interface and existing project together when selecting a replacement.
SSI encoder compatibility
The module supports 13-, 21- or 25-bit SSI frames with Gray or binary coding. When selecting an encoder, compare frame length, coding and supply requirements. Do not treat an incremental A/B pulse interface as equivalent to SSI.
Position data is processed in the PLC program. Treat position acquisition and motor actuation as separate design tasks; the motion system also requires appropriate servo drive and motor selection.
Capturing an event position with FREEZE
A rising edge at I0 or I1 freezes the assigned encoder values. One input can be assigned to multiple channels. Values remain latched until the program acknowledges them. Consider this function for applications that examine position when a sensor is triggered.
Supply and SSI cable limits
Rated supply: 24 V DC. Encoder supply output: L+ − 0.8 V, maximum 900 mA total. Dimensions: 40 × 125 × 120 mm. Size the panel power supply for the combined consumption of the connected encoders.
Maximum shielded SSI cable lengths: 320 m at 125 kHz; 160 m at 250 kHz; 60 m at 500 kHz; 20 m at 1 MHz. Also consider the encoder manufacturer’s requirements and the electrical noise conditions at the installation.
STEP 7 and commissioning
Parameterization uses HW Config in STEP 7 V4.1 or later. Settings include encoder type, coding, clock frequency, monoflop time and FREEZE assignment. Back up the existing S7-300 CPU project and compare actual movement with the reported position during commissioning.
PDF files and manuals
For wiring diagrams and detailed parameter descriptions, visit the S7-300 PDF files section. Check that the selected document covers order number 6ES7338-4BC00-0AB0.
Related topics and categories
S7-300 main page | Special and function modules | Analog and special signal modules
S7-300 CPU modules | Digital input modules | Digital output modules
S7-300 memory cards | Siemens S7 PLC range | Used Siemens products
HMI operator panels | Second-hand main page | OtomasyonAVM home