6ES7336-4GE00-0AB0

Siemens 6ES7336-4GE00-0AB0 – SM 336 F HART Analog Input Module

6ES7336-4GE00-0AB0 is an SM 336 F fail-safe analog input module in the Siemens SIMATIC S7-300 family. It provides 6 analog inputs, 0/4–20 mA current measurement and HART support. It acquires safety-related process measurements for a suitable F-system. Matching the channel count alone does not make it interchangeable with standard S7-300 analog modules.

Key specifications: The module uses a 24 V DC nominal supply, offers 15-bit resolution plus sign and requires a 20-pin front connector. It supports 2-wire and 4-wire current transmitters. Galvanic isolation is provided between channels and between the channels and backplane bus. Direct voltage, thermocouple and Pt100 inputs are not supported.

Application and signal matching: Process variables can be acquired from current-output pressure sensors and suitable transmitters. Temperature sensors require an appropriate current-output transmitter. Check the 24 V DC power supply, sensor supply and wiring arrangement together. Access to field-device parameters through HART must follow the enable conditions and interlocks defined in the safety project.

System compatibility: The module can be used in applications up to SIL 3 / PL e with an appropriate system design. Installing the module alone does not establish this rating: the F-CPU, sensor arrangement, wiring and safety program must be assessed together. Check the existing PLC hardware configuration, CPU/interface version and module revision. Siemens states that this module is not a directly compatible replacement for the earlier 6ES7336-1HE00-0AB0.

Buying a used module: Confirm the complete order number, hardware/firmware version, whether the front connector is included and which channel tests have been performed. Assess measurement accuracy, diagnostic records and HART communication against the intended application. When comparing other used automation devices, distinguish the physical condition from verified operating performance.

PDF files and manuals: Visit S7-300 files for wiring, parameterization and system documentation. Match the document to the 6ES7336-4GE00-0AB0 order number and revision on the device label.

Related topics and categories
S7-300 main page | S7-300 analog modules | PLCs and modules | Sensors
Pressure sensors | Temperature sensors | DIN rail power supplies | Second-hand main page | OtomasyonAVM home

Manufacturer reference: Siemens – 6ES7336-4GE00-0AB0 product information