6ES7335-7HG01-0AB0
Siemens 6ES7335-7HG01-0AB0 – SM 335 Analog I/O Module
6ES7335-7HG01-0AB0 is a Siemens SIMATIC S7-300 SM 335 high-speed analog I/O module. It combines 4 analog inputs and 4 analog outputs in one unit. Input resolution is 14 bits; output resolution is specified as 11/12 bits, depending on the selected range. With electrical isolation, diagnostics and interrupt support, it belongs to the S7-300 analog module range for applications requiring mixed I/O.
Input and output signals
CH0 and CH1 are voltage inputs; CH2 and CH3 can accept voltage or current. The outputs provide 0–10 V or ±10 V; they do not provide direct 4–20 mA output. The catalogue abbreviation U/I does not mean that every input and output supports both signal types.
For example, when selecting a pressure sensor, match its output signal to the intended channel. An incompatible signal requires a suitable analog signal converter or a different module. For correct readings on an HMI panel, the scaling in the PLC program must also match the sensor range.
Connections and revision checks
The module uses a 20-pin front connector. Siemens lists 6ES7392-1AJ00-0AA0 screw-terminal and 6ES7392-1BJ00-0AA0 spring-terminal options for this connector type. Check separately whether the front connector and backplane bus connector are included in the supplied unit. Compare the complete order number, hardware revision and channel settings with the existing Siemens S7 PLC project.
The measuring range module position must match the hardware configuration. Siemens states that the interference filter required for 7HG01 is no longer required for 7HG02. Follow the wiring instructions for the installed revision when assessing the older module.
What should be checked on a used module?
Powering up successfully or showing no fault LED is insufficient to establish analog channel performance. Request known-reference testing of every input, voltage checks on every output under a suitable load, and an assessment of channel-to-channel deviation. When readings fluctuate, investigate the sensor supply, shielding and panel power supply alongside the module. The appearance of a PLC module does not establish its analog accuracy.
PDF files, wiring diagrams and technical documentation
For manuals and technical documents, use the S7-300 files section. Check that the document applies to 6ES7335-7HG01-0AB0 and the revision shown on the device label.
Related topics and product categories
S7-300 main page | S7-300 CPU modules | Digital input modules
Digital output modules | Special and function modules | Analog module range
Used Siemens products | Second-hand main page | OtomasyonAVM home
Manufacturer references
Siemens – 6ES7335-7HG01-0AB0 product record | Siemens – SM 335 revision changes