6ES7332-7ND02-0AB0

6ES7332-7ND02-0AB0 Siemens SM 332 4-Channel Analog Output Module

6ES7332-7ND02-0AB0 is a four-channel SM 332 analog output module with channel-to-channel isolation for Siemens SIMATIC S7-300. It offers 16-bit-class resolution and supports isochronous operation. Check the full order number, output type, load, front connector and existing project settings when selecting a unit.

Output ranges and application compatibility

Voltage outputs: 0–10 V, 1–5 V and ±10 V. Current outputs: 0–20 mA, 4–20 mA and ±20 mA. The selected channel range must match the reference signal accepted by the connected device.

Consider it for sending a command calculated by the PLC to a compatible analog-input variable frequency drive, servo drive or process actuator. For example, when the receiver expects 4–20 mA, wiring alone is insufficient: the output range and program scaling must also match that signal.

An important detail about 16-bit resolution

The manufacturer specifies resolution including sign as 16 bits for ±10 V and ±20 mA; 15 bits for 0–10 V, 0–20 mA and 4–20 mA; and 14 bits for 1–5 V. Do not assume that every range provides 16 bits. Resolution and measurement accuracy are also different specifications.

Supply, connection and load limits

Supply: 24 V DC. Front connector: 20-pin. Dimensions: 40 × 125 × 117 mm. The load must be at least 1 kΩ for voltage outputs and no more than 500 Ω for current outputs. Assess the panel power supply and field connection accordingly.

Isochronous operation and STEP 7 settings

Isochronous use requires a supporting DP master/slave and STEP 7 V5.2 or later. Check the CPU and distributed station configuration together. CPU STOP response can be set to zero current/voltage or hold the last value; verify this setting during commissioning.

PDF files and manuals

Use the S7-300 PDF files section for terminal connections, parameters and diagnostic information. Match the document scope to order number 6ES7332-7ND02-0AB0.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home