6ES7321-7BH80-0AB0

6ES7321-7BH80-0AB0 Siemens SM 321 16-Channel Outdoor Digital Input Module

6ES7321-7BH80-0AB0 is an SM 321 Outdoor digital input module with sixteen 24 V DC inputs in the Siemens SIMATIC S7-300 family. It provides an expanded ambient temperature range, configurable input delay, hardware interrupts and diagnostics. Check the full order number, sensor output, input delay, supply requirements and mounting conditions together.

Input arrangement and sensor compatibility

The module transfers the states of switches, contacts and suitable two-wire, three-wire or four-wire proximity sensors to the PLC program. Its input characteristic follows IEC 61131 Type 2. The specified logic “1” range is 13–30 V, while logic “0” is −30 to +5 V. Check sensor output circuitry and leakage current as well as operating voltage.

The sixteen inputs are isolated from the backplane bus as one group. This does not provide individual galvanic isolation between every input. Assess the field wiring reference arrangement against the manual.

Input delay, interrupts and diagnostics

Selectable input delays are 0.1 / 0.5 / 3 / 15 / 20 ms, with a 3 ms default. The delay setting applies to the whole module. Assess signal duration and electrical interference together when selecting a short delay.

Hardware interrupts for rising, falling or both edges are configured in pairs of inputs. Diagnostics include loss of sensor supply. Review interrupt and diagnostic settings in the existing S7-300 CPU project; these functions depend on the selected configuration.

Sensor supplies and connection

The module provides two short-circuit-protected sensor supplies for input groups 0–7 and 8–15. Each supply output has a 120 mA rated current. Calculate the sensor consumption of each group separately when selecting the 24 V DC power supply.

Front connector: 20-pin. Dimensions: 40 × 125 × 117 mm. For a used unit, inspect the label code, connector and terminals, input LEDs and operation of the required channels.

Outdoor temperature limits

Permitted ambient temperatures are −25 to +60 °C for horizontal installation and −25 to +40 °C for vertical installation. Assess cabinet temperature together with mounting orientation. The Outdoor designation does not permit unenclosed installation exposed to rain.

PDF files and manuals

Visit the S7-300 PDF files section for technical documentation. Match order number 6ES7321-7BH80-0AB0 and the SM 321 DI 16 × 24 V DC Outdoor version with hardware and diagnostic interrupts.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home