Rail type 220/24vDc power supply

220 V AC input, 24 V DC output DIN rail power supplies power PLCs, sensors, relays and control devices inside electrical panels. Confirm that the model’s input voltage range matches your mains supply; wide-range input and automatic voltage selection are not available on every model.
The output current rating must cover all loads operating simultaneously. For example, 24 V DC at 5 A corresponds to 120 W of nominal output capacity. Check temperature derating, housing width, installation clearances, efficiency and short circuit protection in the product documentation.
For motors and inductive loads, also assess starting current and duration. Use the supply’s short-term overload capability and protection behaviour rather than a fixed sizing multiplier. An output interruption during startup may cause connected control devices to restart.
DPK-25W_1.1A-220
DPK-25W_1.1A-220 is a power supply. It provides the electrical supply required by a control circuit...
148.00USD Ex Tax: 148.00USD
DPK_100W_4.2A-220
DPK_100W_4.2A-220 is a power supply. It provides the electrical supply required by a control circuit..
150.00USD Ex Tax: 150.00USD
DPK_150W_6.2A-220
DPK_150W_6.2A-220 is a power supply. It provides the electrical supply required by a control circuit..
151.00USD Ex Tax: 151.00USD
DPK_300W_12.5A-220
DPK_300W_12.5A-220 is a power supply. It provides the electrical supply required by a control circui..
152.00USD Ex Tax: 152.00USD
DPK_500W-20.8A-220
DPK_500W-20.8A-220 is a power supply. It provides the electrical supply required by a control circui..
153.00USD Ex Tax: 153.00USD
DPK_50W-2.1A-220
DPK_50W-2.1A-220 is a power supply. It provides the electrical supply required by a control circuit...
149.00USD Ex Tax: 149.00USD
