QJ61BT11N

The QJ61BT11N is a CC-Link master module designed for the Mitsubishi MELSEC-Q series. This module facilitates communication between the main controller and remote devices in an automation network, allowing high-speed and reliable data transfer. It supports CC-Link Ver.1.10 and can manage multiple slave units, making it ideal for distributed control applications across industries.

Technical Specifications and Configuration Details

    Network Protocol: Compatible with CC-Link Ver.1.10, enabling seamless integration with various CC-Link-compatible devices.

    Master-Slave Management: Controls up to 64 remote stations on the network, providing extensive device control in a single module.

    Data Transfer Speed: Supports data rates up to 10 Mbps, ensuring rapid communication between the controller and devices.

    Station Number Allocation: Easily set up through a rotary switch on the module, allowing users to assign unique station numbers to prevent network conflicts.

    Signal Transmission Distance: Capable of transmitting signals over distances of up to 1,200 meters at lower speeds, and 100 meters at the highest speed of 10 Mbps, allowing flexible installation.

    Power Requirements: Operates at a low voltage of 5V DC with minimal power consumption, enhancing efficiency in large systems.

Software Support

    Programming and Configuration: Compatible with GX Works2 or GX Developer software, which facilitates easy configuration of network parameters, station addresses, and troubleshooting.

    Diagnostic and Monitoring Tools: The software includes diagnostic tools that allow for real-time monitoring of network health, troubleshooting error codes, and confirming communication statuses across all connected devices.

Commissioning and Recommendations

    Initial Setup: Ensure proper wiring according to the CC-Link standards to minimize interference and signal loss.

    Network Verification: Use GX Works2 or GX Developer to verify all station addresses are correctly assigned and unique, preventing communication issues.

    Maintenance and Monitoring: Regularly monitor network performance using the diagnostic features in the software to detect and address potential issues early.

    Testing Procedures: Prior to full operation, conduct thorough testing of each connected station for optimal performance and to confirm the integrity of data transmission.

The QJ61BT11N is essential for complex automation networks, providing robust control and efficient communication. Following a structured commissioning process ensures reliability and long-term performance in distributed control environments.


>> Mitsubishi QJ61BT11N User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QJ61BT11N and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."