Q68TD-G-H01

Q68TD-G-H01 Thermocouple Input Module

The Q68TD-G-H01 is an 8-channel thermocouple input module designed for the MELSEC-Q series. It is primarily used for precise temperature measurements in industrial settings.

Key Specifications:
     Input Channels: 8 thermocouple channels.
     Thermocouple Types: Supports types B, R, S, K, E, J, and T, adhering to DIN IEC 584-1 standards.
     Temperature Range:
        Type B: 800–1700°C
        Type R: 300–1600°C
        Type S: 300–1600°C
        Type K: 0–1200°C
        Type E: 0–800°C
        Type J: 0–750°C
        Type T: 0–350°C
     Accuracy: Conversion accuracy is approximately ±0.5°C (or 0.25% of the measured temperature for Type K).
     Resolution:
        Types B, R, S: 0.3°C
        Types K, E, J, T: 0.1°C
     Cold Junction Compensation: ±1°C accuracy.

Connection and Isolation:
     Required Connector: Uses an A6CON4 connector for easy connection to thermocouple wires.
     Isolation Method: Transformer isolation between the module and the process controller, providing reliable data integrity and noise immunity.

Conversion Time:
     Up to 400 ms for all 8 channels.

This module provides excellent performance for high-temperature environments and supports a range of industrial thermocouple types.



>> Mitsubishi Q68TD-G-H01 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q68TD-G-H01 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."