QJ71MT91
QJ71MT91: MODBUS/TCP Protocol Module with Master and Slave Functions
The QJ71MT91 is a MODBUS/TCP communication module designed for the Mitsubishi Q Series PLCs, supporting both master and slave functions within a MODBUS network. This module enables Q Series PLCs to communicate with other devices over Ethernet using the widely used MODBUS/TCP protocol, making it ideal for integrating Mitsubishi PLCs with various third-party devices in industrial automation systems.
Technical Specifications:
Protocol: MODBUS/TCP, supporting communication over Ethernet.
Master/Slave Functions: Capable of acting as both a MODBUS master and a slave, allowing flexible network roles.
Communication Speed: Standard Ethernet speeds, ensuring efficient data exchange across the network.
I/O Data Points: Supports high-capacity I/O data exchange, allowing for extensive device integration within a MODBUS network.
Supported CPUs and Programming Software:
Compatible CPUs: Integrates with Mitsubishi Q Series PLCs, providing seamless MODBUS/TCP operation.
Programming Software: Configurable using GX Works2 and GX Developer, allowing setup of MODBUS parameters, IP addressing, and network monitoring.
Installation and Wiring Recommendations:
Mounting: Securely install in the Q Series PLC rack to ensure stable Ethernet communication.
Ethernet Wiring: Use high-quality Ethernet cables with proper shielding to reduce network noise and interference.
Commissioning Notes and Maintenance Tips:
Initial Testing: Verify both master and slave communication functions by testing data exchange with connected devices.
Routine Maintenance: Regularly monitor network traffic and inspect Ethernet connections to ensure continuous performance.
The QJ71MT91 module enhances industrial systems by enabling MODBUS/TCP communication, making it a versatile solution for integrating Mitsubishi PLCs with a variety of devices and control systems that utilize the MODBUS protocol.
>> Mitsubishi QJ71MT91 User manual (pdf)
----------
+ Mitsubishi Automation Homepage
+ Mitsubishi Electric Contact (for Automation Mall)