AJ65SBT-62DA

AJ65SBT-62DA: Compact 2-Channel Current or Voltage Output Module

 The AJ65SBT-62DA is a compact analog output module in the Mitsubishi MELSEC series, designed to precisely control current and voltage outputs in industrial environments. This two-channel module, with its low-profile design, is ideal for installations in confined spaces, providing flexibility for varying output requirements.

Technical Specifications:

    Output Channels: 2 independent channels, configurable for current or voltage output modes.
    Supported Output Ranges:
        Voltage Output: Provides a precise voltage range of -10V to +10V.
        Current Output: Offers options for 0mA to 20mA or 4mA to 20mA output.
    Resolution and Accuracy: High resolution per channel with accuracy maintained within ±1%.
    Conversion Speed: Ensures fast and accurate signal output with a conversion time of 25 ms for both channels.

Supported CPUs and Programming Software:

    Compatible CPUs: Compatible with MELSEC AnS and QnAS series CPUs, allowing full integration with Mitsubishi’s PLCs.
    Programming Software: Configurable with GX Developer and GX IEC Developer, supporting ladder diagram and instruction list programming modes. These tools also offer offline simulation for ease of use.

Installation and Wiring Recommendations:

    Grounding and Isolation: Ensure proper grounding to prevent interference, and maintain isolation between current and voltage lines.
    Wiring Setup: Verify that all connections are correct and match the specified load resistance for each output range. For voltage outputs, use high-impedance loads to maintain output accuracy.

Commissioning Notes and Maintenance Tips:

    Initial Setup: After installation, check and calibrate the output settings for each channel.
    Regular Testing: Perform periodic verification tests, especially when output requirements change, to maintain signal accuracy.
    Routine Maintenance: Regularly inspect connection points for any degradation and verify signal integrity on each output channel.


>> Mitsubishi AJ65SBT-62DA User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi AJ65SBT-62DA and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."