QY80

The Mitsubishi QY80 is a 16-point transistor output module designed for use with MELSEC-Q Series PLCs. This module is ideal for controlling medium-power industrial devices such as contactors, relays, and indicator lamps. With its source-type transistor outputs, the QY80 provides efficient control of 12-24V DC loads, making it a solid choice for applications requiring reliable output performance and higher current per output.


Technical Specifications and Supported Programs

    Output Channels: 16 transistor outputs (source type), compatible with 12-24V DC devices.
    Current Specifications:
        Per Point: Maximum 0.5A
        Common Output Capacity: 4A per common group (all 16 points share a common output capacity)
    Output Type: Source type, meaning it provides current to the connected load.
    Isolation: Optical isolation on each output channel, ensuring protection against electrical surges and reducing noise interference.
    Response Time: Fast response time of less than 0.5 ms per channel.
    Wiring: Equipped with screw terminals for robust, secure connections.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Meets IEC 61131-2 standards, supporting durability in demanding environments.

Supported Programming Software: The QY80 module is compatible with Mitsubishi's GX Works2 and GX Developer software. These platforms provide the tools to configure, monitor, and troubleshoot the module, enabling technicians to fine-tune settings efficiently.


Commissioning Notes and Recommendations

    Initial Setup: Confirm the wiring layout and secure the module in the PLC rack to ensure proper installation and power distribution.
    Power Verification: Ensure that the module is receiving the appropriate 12-24V DC power and verify that the total current load per common does not exceed the 4A limit.
    Testing Outputs: Run a diagnostic test using GX Works2 or GX Developer to validate each output under controlled load conditions before full-scale operation.
    Routine Maintenance: Regularly check terminal connections and clean them as needed to prevent connectivity issues, ensuring optimal and stable performance over time.

By following these setup and maintenance guidelines, the QY80 module will operate effectively, delivering stable and reliable output control for various industrial applications.



>> Mitsubishi QY80 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY80 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."