QY71

The Mitsubishi QY71 is a 32-point transistor output module for the MELSEC-Q Series PLCs. It’s specifically designed for low-voltage control tasks, operating within the 5-12V DC range. The module’s sink-type outputs make it ideal for applications requiring a compact and efficient solution to manage multiple low-power devices, such as small relays, indicators, or other low-current loads.


Technical Specifications and Supported Programs

    Output Channels: 32 transistor outputs (sink type), suitable for devices operating at 5-12V DC.
    Current Specifications:
        Per Point: Maximum of 16mA
        Common Output Capacity: 512mA shared across all 32 points
    Output Type: Sink type, meaning the module sinks current from the connected load.
    Isolation: Optical isolation for each output channel, enhancing protection against electrical surges and minimizing noise.
    Response Time: Less than 0.5 ms per output channel, enabling rapid switching.
    Wiring: Uses screw terminals for secure and durable connections suitable for industrial settings.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Compliant with IEC 61131-2 standards, providing resilience in tough environments.

Supported Programming Software: The QY71 is compatible with Mitsubishi's GX Works2 and GX Developer platforms, allowing for seamless module configuration, monitoring, and troubleshooting.


Commissioning Notes and Recommendations

    Setup and Installation: Secure the module in the appropriate PLC slot and verify all connections to ensure that the module is properly grounded.
    Power Verification: Ensure the module operates within the 5-12V DC range and confirm the total load per common does not exceed 512mA.
    Output Testing: Use GX Works2 or GX Developer to test each output point under controlled load conditions to confirm functionality before full-scale deployment.
    Maintenance: Periodically inspect connections and clean terminals to prevent dust accumulation and ensure consistent operation.

By following these setup and maintenance guidelines, the QY71 module will provide reliable performance, offering effective control for low-current DC applications across various industrial settings.



>> Mitsubishi QY71 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY71 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."