QY68A

The Mitsubishi QY68A is a 16-point transistor output module designed for the MELSEC-Q Series PLCs. With support for both sink and source configurations, this versatile module is suitable for a range of applications where flexible output control is required. The QY68A’s independent output points can handle higher current loads, making it ideal for driving larger devices directly, such as solenoids, actuators, and motors.


Technical Specifications and Supported Programs

    Output Channels: 16 independent transistor outputs, compatible with both sink and source configurations.
    Voltage Range: Operates within a 5-24V DC range.
    Current Specifications:
        Per Point: 2A maximum
        Total Unit Capacity: 8A, with current distribution across outputs as needed
    Output Type: Each point can be configured individually as sink or source, allowing flexibility in control of connected devices.
    Isolation: Optical isolation for each output point provides robust protection against electrical surges and noise.
    Response Time: Typical response time is less than 0.5 ms per output.
    Wiring: Equipped with screw terminals, ensuring durable and secure connections suitable for industrial environments.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Meets IEC 61131-2 standards for enhanced reliability in demanding conditions.

Supported Programming Software: The QY68A module is compatible with GX Works2 and GX Developer, Mitsubishi’s programming tools that offer intuitive interfaces for configuration, monitoring, and troubleshooting.


Commissioning Notes and Recommendations

    Installation and Wiring: Ensure the module is securely mounted in the PLC rack and wired according to specified sink or source requirements for each independent output.
    Power Verification: Confirm that the voltage remains within the 5-24V DC range and that the total current does not exceed 8A across the unit.
    Output Testing: Use GX Works2 or GX Developer to conduct functional testing for each output point individually, verifying the load handling capacity before full-scale deployment.
    Routine Maintenance: Regularly inspect all connections and clean terminals to prevent connectivity issues, ensuring reliable module operation over time.

By following these setup and maintenance steps, the QY68A module will provide efficient and flexible control for applications with diverse output requirements, supporting both high-current devices and complex industrial processes.


>> Mitsubishi QY68A User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY68A and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."