QY50

The Mitsubishi QY50 is a 16-point transistor output module compatible with the MELSEC-Q Series PLCs. Designed for sink-type configurations, this module efficiently controls 12-24V DC devices, making it ideal for managing moderate power outputs such as relays, indicators, and other small actuators. The QY50 provides reliable performance in applications requiring fast switching and stable operation.


Technical Specifications and Supported Programs

    Output Channels: 16 transistor outputs (sink type), suitable for 12-24V DC devices.
    Current Specifications:
        Per Point: 0.5A maximum
        Common Output Capacity: 4A shared across all 16 points
    Output Type: Sink type, meaning it sinks current from the connected load.
    Isolation: Optical isolation for each output channel, providing protection against electrical surges and reducing noise interference.
    Response Time: Typical response time is less than 0.5 ms per channel.
    Wiring: Equipped with screw terminals for secure and reliable connections in industrial settings.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Conforms to IEC 61131-2 standards for durability in harsh environments.

Supported Programming Software: The QY50 module is compatible with GX Works2 and GX Developer, Mitsubishi’s programming software, allowing users to configure, monitor, and troubleshoot module settings efficiently.


Commissioning Notes and Recommendations

    Setup and Installation: Ensure the module is correctly seated in the PLC rack and verify all wiring connections to match the specified sink configuration.
    Power Verification: Confirm that the module operates within the 12-24V DC range and ensure the total load per common does not exceed the 4A limit.
    Testing Outputs: Use GX Works2 or GX Developer to run tests on each output under controlled load conditions, confirming each channel’s functionality before full deployment.
    Regular Maintenance: Periodically inspect and clean terminal connections to maintain consistent performance and prevent potential connectivity issues.

Following these guidelines will ensure the QY50 module operates reliably, supporting efficient control of moderate DC loads across various industrial applications.



>> Mitsubishi QY50 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY50 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."