QY40P

The Mitsubishi QY40P is a 16-point transistor output module compatible with MELSEC-Q Series PLCs. This module is designed for sink-type configurations, handling 12-24V DC devices with low-current requirements. The QY40P is ideal for applications that need efficient control of low-power devices such as small relays, LEDs, or indicators in a compact format.


Technical Specifications and Supported Programs

    Output Channels: 16 transistor outputs (sink type), compatible with 12-24V DC devices.
    Current Specifications:
        Per Point: 0.1A maximum
        Common Output Capacity: 1.6A across all 16 points
    Output Type: Sink type, meaning it sinks current from the connected load.
    Isolation: Optical isolation for each output point, ensuring protection against electrical surges and minimizing interference.
    Response Time: Less than 0.5 ms per channel, providing fast and reliable switching.
    Wiring: Equipped with screw terminals to ensure secure and stable connections suitable for industrial environments.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Meets IEC 61131-2 standards, providing resilience in industrial applications.

Supported Programming Software: The QY40P is compatible with GX Works2 and GX Developer software, which allows for easy configuration, monitoring, and troubleshooting.


Commissioning Notes and Recommendations

    Installation: Secure the module in the appropriate PLC rack slot and verify all connections, ensuring proper grounding and adherence to the sink configuration.
    Power and Load Check: Verify that the operating voltage remains within the 12-24V DC range and confirm that the total current across the module does not exceed 1.6A.
    Testing: Use GX Works2 or GX Developer to conduct initial tests on each output under controlled load conditions, ensuring all channels function correctly before operational deployment.
    Routine Maintenance: Periodically inspect and clean terminal connections to prevent any potential connectivity issues, maintaining consistent module performance.

By following these setup and maintenance recommendations, the QY40P module will deliver reliable performance in low-current applications, providing efficient and stable control for various DC devices.


>> Mitsubishi QY40P User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY40P and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."