QY10

The Mitsubishi QY10 is a 16-point relay output module designed for the MELSEC-Q Series PLCs. This module is capable of handling both AC and DC loads, providing control for devices that operate within a voltage range of 240V AC or 24V DC. The QY10 is ideal for applications that require collective relay control of multiple devices, such as motors, solenoids, or lights, with a shared common connection across all 16 points.


Technical Specifications and Supported Programs

    Output Channels: 16 relay outputs, with a common connection for all outputs.
    Voltage Range:
        AC: Up to 240V
        DC: Up to 24V
    Current Specifications:
        Per Point: Maximum 2A per contact
    Output Type: Relay-based outputs, providing robust control of higher-power devices with shared common wiring for the outputs.
    Isolation: The outputs are relay isolated, ensuring protection from electrical noise and interference.
    Response Time: Relay switching suitable for moderate-speed applications, generally slower than transistor outputs but reliable for higher-current operations.
    Wiring: Features screw terminals for durable and secure connections, supporting both AC and DC wiring requirements.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Compliant with IEC 61131-2 standards, making it suitable for industrial environments.

Supported Programming Software: The QY10 is supported by GX Works2 and GX Developer software, which simplifies configuration, monitoring, and testing for PLC integration.


Commissioning Notes and Recommendations

    Installation and Wiring: Secure the module in the PLC rack and ensure proper wiring for both AC and DC devices, ensuring the common connection is correctly established across all outputs.
    Power Check: Confirm that the operating voltage does not exceed 240V AC or 24V DC and that the current load per contact remains within the 2A limit.
    Testing: Use GX Works2 or GX Developer to run functional tests on each relay output, ensuring proper operation of all channels under controlled load conditions.
    Maintenance: Periodically inspect and clean the relay contacts and terminal connections to prevent wear and ensure reliable performance over time.

By following these setup and maintenance guidelines, the QY10 module will deliver stable and reliable output control for higher-current AC and DC applications, making it a dependable choice for industrial control systems.



>> Mitsubishi QY10 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QY10 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."