QX72

The Mitsubishi QX72 is a 64-point sensor input module for the MELSEC-Q Series PLCs, designed specifically for applications requiring multiple low-voltage DC sensor inputs. With a sink-type configuration and a shared common connection across every 32 points, the QX72 is ideal for systems needing efficient and high-density input monitoring.

Technical Specifications and Supported Programs

    Input Channels: 64 sensor inputs (sink type), compatible with 5-12V DC sensors.
    Current Specifications:
        Per Point: 1.2mA at 5V DC or 3.3mA at 12V DC
    Common Configuration: Inputs are grouped with a shared common for every 32 points, optimizing wiring efficiency.
    Input Type: Sink type, meaning the module sinks current from the connected sensors.
    Isolation: Optical isolation provided on each input, ensuring protection from electrical noise and enhancing signal stability.
    Wiring: Equipped with screw terminals, offering secure and durable connections for industrial applications.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Compliant with IEC 61131-2 standards, suitable for rugged environments.

Supported Programming Software: The QX72 module is compatible with GX Works2 and GX Developer, allowing users to set up, monitor, and troubleshoot with ease.


QX72: 64-point sensor input module for 5-12V DC at 1.2/3.3mA, sink type, common to 32 points.



Commissioning Notes and Recommendations

    Installation and Wiring: Ensure the module is properly seated in the PLC rack and confirm wiring according to the sink-type configuration, with shared commons for each group of 32 inputs.
    Power Verification: Verify that each sensor input operates within the 5-12V DC range and meets the current requirement of 1.2mA or 3.3mA, depending on the voltage.
    Input Testing: Use GX Works2 or GX Developer to test each input channel under expected operating conditions, ensuring functionality prior to full deployment.
    Maintenance: Regularly inspect connections and clean terminals to prevent connectivity issues, ensuring consistent input performance.

By following these guidelines, the QX72 module will provide reliable and efficient sensor input management, making it ideal for high-density, low-voltage sensor applications in industrial automation systems.



>> Mitsubishi QX72 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QX72 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."