QX70

The Mitsubishi QX70 is a 16-point sensor input module for the MELSEC-Q Series PLCs, optimized for handling low-voltage DC sensor inputs. With its sink-type configuration and a shared common across all input points, the QX70 is an efficient choice for applications that require reliable and precise monitoring of 5-12V DC sensor signals in industrial environments.

Technical Specifications and Supported Programs

    Input Channels: 16 sensor inputs (sink type), compatible with 5-12V DC sensors.
    Current Specifications:
        Per Point: 1.2mA at 5V DC or 3.3mA at 12V DC
    Common Configuration: All 16 input points share a single common connection, simplifying the wiring setup.
    Input Type: Sink type, meaning the module sinks current from connected sensors.
    Isolation: Optical isolation on each input channel, enhancing protection against electrical noise and ensuring stable signal quality.
    Wiring: Screw terminals provide secure and reliable connections suited for industrial applications.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Conforms to IEC 61131-2 standards, suitable for rugged conditions.

Supported Programming Software: The QX70 module is compatible with GX Works2 and GX Developer, enabling straightforward setup, monitoring, and diagnostics.


 QX70: 16-point sensor input module for 5-12V DC at 1.2/3.3mA, sink type, common to 16 points.


Commissioning Notes and Recommendations

    Installation and Wiring: Install the module securely in the PLC rack and confirm that wiring adheres to the sink-type configuration, with a shared common across the 16 inputs.
    Power Check: Verify each input meets the required voltage and current (1.2mA or 3.3mA based on voltage).
    Testing: Use GX Works2 or GX Developer to test each input under operational conditions, ensuring correct functionality before deployment.
    Maintenance: Regularly inspect and clean connections to maintain reliable performance and prevent connectivity issues.

Following these setup and maintenance steps will ensure the QX70 module provides consistent and accurate input monitoring, making it suitable for applications with low-voltage sensors in industrial automation.



>> Mitsubishi QX70 User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QX70 and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."