QH42P

The Mitsubishi QH42P is a 32-point input/output module designed for MELSEC-Q Series PLCs, offering both digital input and output capabilities in a single unit. This module is suited for applications that require efficient integration of 24V DC inputs and 12-24V DC outputs, all configured with sink-type functionality. Its dual input/output design streamlines control systems by combining monitoring and actuation in one module.

Technical Specifications and Supported Programs

    Input Channels: 32 digital inputs (sink type), compatible with 24V DC signals.
        Current per Input: 4mA at 24V DC
    Output Channels: 32 digital outputs (sink type), suitable for 12-24V DC devices.
        Current per Output: 0.1A maximum per point
    Common Configuration: A shared common connection is provided for both inputs and outputs across all 32 points, simplifying wiring.
    Input/Output Type: Both input and output channels are configured as sink type, allowing the module to sink current from connected devices.
    Isolation: Optical isolation on each input and output channel, ensuring protection against electrical noise and interference.
    Wiring: Equipped with screw terminals for secure, industrial-grade connections.
    Environmental Conditions:
        Operating Temperature: 0-55°C
        Humidity: 10-90% RH (non-condensing)
        Vibration and Shock Resistance: Meets IEC 61131-2 standards for reliable performance in industrial settings.

Supported Programming Software: The QH42P is compatible with GX Works2 and GX Developer, Mitsubishi’s tools that provide setup, monitoring, and troubleshooting capabilities for this combined input/output module.

Commissioning Notes and Recommendations

    Installation and Wiring: Ensure proper mounting in the PLC rack, with wiring aligned to the sink-type configuration. Verify that common connections are correctly shared across the 32 input and output points.
    Power and Load Verification: Confirm each input operates at 24V DC and 4mA, while outputs are within the 12-24V DC range with a maximum of 0.1A per point.
    Input/Output Testing: Use GX Works2 or GX Developer to verify each input and output channel under expected conditions, ensuring functionality before operational deployment.
    Maintenance: Regularly inspect connections to maintain signal stability and output performance, cleaning terminals as needed to prevent connectivity issues.

By following these setup and maintenance guidelines, the QH42P module will deliver reliable dual input/output functionality, making it an efficient choice for industrial control applications requiring combined monitoring and actuation capabilities.



>> Mitsubishi QH42P User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi QH42P and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."