Q00CPU

The Q00CPU module is a fundamental member of Mitsubishi’s MELSEC-Q series programmable logic controllers (PLC). Designed primarily for small-scale control systems, this model stands out with its compact structure and built-in serial communication capabilities. For electricians, Q00CPU offers a robust and user-friendly CPU capable of meeting essential control requirements.

Technical Specifications

    Processing Speed and Capacity: The Q00CPU has a processing speed of 160 ns for basic instructions, enabling rapid processing of control signals. It also offers 14K steps of program memory, providing adequate space for smaller systems.
    I/O (Input/Output) Capacity: Supporting up to 2,048 input and 2,048 output device points, the Q00CPU is sufficient for basic sensors and actuators.
    Memory and Data Storage: The module includes standard ROM to protect stored data in case of power interruptions and supports program and parameter storage in standard RAM as well.
    Power Consumption: Operating at 5V DC with approximately 0.35A current draw, the Q00CPU is ideal for systems aiming for energy efficiency.
    Built-in Serial Communication: Equipped with an RS-232 serial port, this model enables easy data exchange with other devices, such as computers, operator panels, or additional PLCs.
    Size and Mounting: The compact structure of the Q00CPU makes it space-efficient. Installation is straightforward for those experienced with PLC systems, as it’s compatible with MELSEC-Q standard mounting rails and can be easily mounted.

Usage and Connection Recommendations

    External Power Connection: Proper grounding connections are crucial since the module is powered by an external power source. This is especially important in industrial environments to avoid noise interference.
    Memory Card Usage for Backup: The Q00CPU utilizes standard RAM and ROM for data storage and backup. It is recommended to back up essential data via a memory card before putting the system into operation.
    Programming and Communication: The module is easily programmable via GX Developer or GX Works software. The RS-232 port allows for communication with other PLCs or computers, enabling system expansion.

Recommendations and Advice

For electricians, it is recommended to ensure proper grounding during the installation and commissioning of the Q00CPU module. If installed alongside high-current devices in the same panel, maintain a minimum distance of 10 cm from other devices to reduce the risk of interference. When programming and transferring data, verify that all connections are secure to prevent data loss. Regular maintenance, including checking the integrity of all connections and components, is advised to extend the device’s operational lifespan.

>> Mitsubishi Q00CPU User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q00CPU and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."