Q68RD3-G

Q68RD3-G RTD Giriş Modülü Genel Bakış

*The Q68RD3-G is an 8-channel RTD (Resistance Temperature Detector) input module from Mitsubishi Electric's MELSEC-Q series, designed for precise temperature measurements in industrial automation processes.*

Key Specifications:

     Channel Count: 8 independent RTD input channels.
     Supported RTD Types: PT100, JPT100, and NI100.
     Measurement Range:
        *PT100 and JPT100: -100°C to +600°C.*
        *NI100: -100°C to +200°C.*
     Resolution: 0.1°C.
     Accuracy: ±0.5°C or 0.1% of the measured temperature.
     Isolation: Photo-coupler isolation between each channel and between the module and the PLC, offering *high noise immunity.*
     Conversion Time: Up to 400 ms for all channels.
     Power Consumption: Approximately 0.54 A (5V DC).
     Dimensions: Width 27.4 mm, Height 102 mm, Depth 130 mm.
     Weight: Approximately 0.2 kg.

Usage Notes:

     Connections: *Ensure RTD sensors are connected correctly for accurate measurements.*
     Calibration: Periodic calibration is recommended for enhanced accuracy.
     Environmental Conditions: *The module should operate within specified temperature and humidity ranges for optimal performance.*


>> Mitsubishi Q68RD3-G User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q68RD3-G and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."