Q68ADV

Q68ADV Analog-to-Digital Converter Module Overview

The Q68ADV module is an 8-channel Analog-to-Digital Converter (ADC) module designed for voltage input within Mitsubishi's MELSEC-Q series.

Key Specifications:
     Channel Count: 8 independent analog input channels.
     Input Range: Supports voltage input with ranges of 0 to 10V by default. User-configurable ranges also include -10V to +10V and 0 to 5V.
     Resolution: Provides resolution modes of 1/4000, 1/12000, or 1/16000, which can be adjusted for application requirements.
     Accuracy: The conversion accuracy is ±0.1% at 25°C, ensuring high reliability in signal processing.
     Isolation: Transformer isolation between the module and the PLC, ensuring protection from electrical noise.
     Conversion Speed: 80 μs per channel, making it suitable for high-speed applications.

Usage Notes:
     Mounting and Grounding: Ensure proper grounding on the FG terminal for noise immunity and stable operation.
     Configuration: Initial setup and offset/gain settings can be configured using the GX Configurator-AD utility.
     Calibration: Regular calibration is recommended to maintain accuracy, especially if used in varying temperature environments.

This module’s high resolution and adjustable input range make it ideal for precise measurements and flexible use in industrial automation.



>> Mitsubishi Q68ADV User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q68ADV and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."