Q68AD-G

Q68AD-G Analog-to-Digital Converter Module

The Q68AD-G is an 8-channel Analog-to-Digital Converter (ADC) module in the Mitsubishi MELSEC-Q series, specifically designed for current and voltage input applications.

Key Specifications:
     Channel Count: 8 independent input channels for simultaneous analog data processing.
     Input Range:
        Voltage inputs range from -10V to +10V.
        Current inputs are set from 0 to 20mA.
     Resolution: Offers high-resolution modes with options of 1/4000, 1/12000, or 1/16000 depending on the application.
     Accuracy: Conversion accuracy is maintained at approximately ±0.1%, ensuring stable data acquisition and reliable process control.
     Isolation: Transformer isolation exists between the module and the PLC, enhancing protection against electrical noise and interference.
     Conversion Speed: High-speed conversion rate of 80 μs per channel, making it suitable for real-time monitoring applications.

Usage and Installation Notes:
     Grounding: Proper grounding on the FG terminal is necessary to enhance noise immunity and ensure accurate signal processing.
     Configuration: The module can be configured via GX Configurator-AD software, enabling easy setup for input range, offset, and gain adjustments.
     Calibration: Periodic calibration is advised to maintain accuracy, particularly in variable environmental conditions.

This module is ideal for industrial applications requiring precise analog measurements, providing stable and high-resolution data acquisition capabilities.


>> Mitsubishi Q68AD-G User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q68AD-G and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."