Q64TDV-GH

Q64TDV-GH Thermocouple Input Module

The Q64TDV-GH module is a 4-channel thermocouple input module designed for temperature measurement within Mitsubishi's MELSEC-Q series.

Key Specifications:
     Channel Count: 4 thermocouple input channels.
     Supported Thermocouple Types: K, J, E, and T types, enabling versatile temperature measurements across various industrial applications.
     Temperature Range: The input range varies depending on the thermocouple type, for example:
        Type K: -200°C to +1370°C
        Type J: -200°C to +1200°C
        Type E: -200°C to +800°C
        Type T: -200°C to +400°C
     Accuracy: High precision with approximately ±0.5°C, ensuring reliable temperature monitoring.
     Isolation: Transformer isolation between the module and the PLC, offering robust protection against electrical noise and signal interference.
     Resolution: Supports fine resolution, enhancing data quality for applications needing detailed temperature tracking.
     Conversion Speed: Up to 400 ms for all channels.

Installation and Usage Notes:
     Grounding: Proper grounding on the FG terminal is crucial for maintaining signal integrity.
     Configuration: Initial setup, including temperature range and thermocouple type selection, can be configured using GX Configurator software.
     Calibration: Routine calibration is recommended to ensure the accuracy of measurements, especially in environments with temperature fluctuations.

The Q64TDV-GH is ideal for industrial applications that require high-precision and stable temperature measurement solutions.



>> Mitsubishi Q64TDV-GH User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q64TDV-GH and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."