Q64AD2DA

Q64AD2DA Module

The Q64AD2DA is a 4-channel Analog-to-Digital and 2-channel Digital-to-Analog Converter (ADC/DAC) module in Mitsubishi’s MELSEC-Q series, providing both analog input and output capabilities for versatile data processing in industrial applications.

Channel Configuration:
     4 Analog Input channels (A/D conversion)
     2 Analog Output channels (D/A conversion)

Input Types:
     Voltage Input: Configurable between 0 to 10V and -10V to +10V.
     Current Input: Supports standard industrial signals such as 4 to 20 mA and 0 to 20 mA.

Output Types:
     Voltage Output: Configurable between 0 to 10V and -10V to +10V.
     Current Output: Configurable between 4 to 20 mA and 0 to 20 mA.

Resolution:
     Offers high-resolution data conversion for both input and output channels, ideal for applications requiring precise control.

Isolation:
     Photo-coupler isolation between the module and CPU protects against noise interference.

Installation and Usage Notes:
    Configuration: Easily configured using GX Configurator-DA software, allowing adjustments for input/output ranges, offset, and gain settings.
    Grounding: Proper grounding is essential to maintain signal integrity.
    Calibration: Regular calibration is recommended to ensure high accuracy, especially when operating under varying environmental conditions.

The Q64AD2DA module provides a versatile and reliable solution for automation systems that require both analog signal acquisition and output control.


>> Mitsubishi Q64AD2DA User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q64AD2DA and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."