Q64AD-GH

Q64AD-GH Module 

The Q64AD-GH is a 4-channel Analog-to-Digital Converter (ADC) module in the Mitsubishi MELSEC-Q series, designed to provide reliable data acquisition for various industrial applications.

Number of Channels:
     Offers 4 independent analog input channels.

Supported Input Types:
     Compatible with both voltage and current inputs, supporting the following common signal ranges:
       Voltage Input: 0 to 10V or -10V to +10V
       Current Input: 4 to 20 mA or 0 to 20 mA

Speed and Resolution:
     Fast Conversion: Provides high-speed data processing with a conversion rate of 80 µs per channel.
     High Resolution: Offers resolutions up to 12,000 or 16,000 digital values, ideal for precise measurements.

Isolation:
     Features isolation between channels and between the module and PLC, protecting against signal interference.

Installation and Usage Notes:
    Grounding: Proper grounding helps reduce noise and ensures data integrity.
    Configuration Software: GX Configurator-AD software allows configuration of input type, measurement ranges, gain, and offset settings for each channel.
    Calibration: Regular calibration is recommended to maintain high accuracy, especially when used in variable temperature environments.

The Q64AD-GH module is ideal for automation systems requiring high accuracy in data collection for parameters such as temperature, pressure, and other critical measurements.


>> Mitsubishi Q64AD-GH User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q64AD-GH and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."