Q64AD

Q64AD Module

The Q64AD is a 4-channel Analog-to-Digital Converter (ADC) module in Mitsubishi's MELSEC-Q series, designed for accurate analog signal measurement in industrial applications.

Channel Configuration:
     Provides 4 analog input channels.

Supported Input Types:
     Compatible with both voltage and current inputs, supporting:
       Voltage Input: 0 to ±10V
       Current Input: 0 to 20mA or 4 to 20mA

Resolution and Speed:
     High-speed Conversion: Provides fast data acquisition with a conversion rate of 80 µs per channel.
     Adjustable Resolution: Digital value resolution settings include 1/4000, 1/12000, or 1/16000.

Accuracy:
     Maintains ±0.1% accuracy when ambient temperature is around 25°C ± 5°C, ensuring high reliability.

Isolation:
     Provides electrical isolation between each channel and the PLC, protecting against electrical noise.

Installation and Usage Notes:
    Grounding: Proper grounding of the A.G. terminal is essential for reducing noise and ensuring signal integrity.
    Configuration: Settings can be adjusted using the GX Configurator-AD software, including input ranges, gain, and offset for each channel.
    Calibration: Regular calibration is recommended to maintain high accuracy, especially in fluctuating temperature environments.

>> Mitsubishi Q64AD User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q64AD and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."