Q62DAN

Q62DAN Module 

The Q62DAN is a 2-channel Digital-to-Analog (D/A) Converter Module in Mitsubishi's MELSEC-Q series, designed to convert digital signals into analog outputs for industrial control applications.

Channels:
     2 analog output channels, configurable for voltage or current outputs.

Output Types:
       Voltage Output: 0 to ±10V range
       Current Output: 0 to 20 mA or 4 to 20 mA supported.

Resolution:
     Provides high-resolution outputs, ideal for precise control applications.

Isolation:
     Equipped with photo-coupler isolation between I/O terminals and the controller, though there is no isolation between channels.

Load Resistance:
       Requires a minimum load resistance of 500 ohms for current output.
       Supports external load resistance in the range of 0 to 600 ohms for current outputs.

Installation and Usage Notes:
    Configuration: Configurable via GX Configurator-DA software, allowing users to set output ranges, offset, and gain for each channel.
    Wiring Precautions: An additional 30mm of wiring length may be needed if replacing an older model with the Q62DAN.
    Calibration: Regular calibration is recommended, especially if used in varying temperature environments, to maintain output accuracy.

The Q62DAN module is suitable for applications where precise and stable analog output signals are essential, particularly in control systems requiring flexibility with both current and voltage signals.


>> Mitsubishi Q62DAN User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q62DAN and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."