Q62AD-DGH

The Q62AD-DGH module is an Analog-to-Digital (A/D) Converter Module in Mitsubishi’s MELSEC-Q series, designed to support high-resolution analog data acquisition across multiple channels. 

    Channel Configuration: Offers multiple analog input channels suitable for simultaneous data processing.
    Input Signal Types:
        Voltage Input: Configurable to handle signals between 0 and ±10V.
        Current Input: Supports ranges such as 4-20 mA and 0-20 mA, compatible with standard industrial current signals.

    Resolution and Conversion Speed:
        High-resolution analog-to-digital conversion, with options for standard and high-precision modes.
        Conversion times optimized for real-time applications, typically suitable for complex monitoring systems.

    Temperature Stability: Features a low temperature coefficient, enhancing accuracy in variable environments.
    Isolation: Electrical isolation between channels and CPU, which minimizes noise interference.

Installation and Usage Notes

    Configuration: Use GX Configurator-AD software to set input signal types, gain, and offset settings.
    Calibration: Regular calibration is recommended to maintain precision, especially in changing temperature conditions.
    Fault Management: Provides LED status indicators and error codes to assist with troubleshooting during operation.

The Q62AD-DGH is well-suited for industrial applications requiring precise and reliable analog data conversion, ensuring effective data collection for complex automation systems.


>> Mitsubishi Q62AD-DGH User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q62AD-DGH and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."