Q61LD

The Q61LD is a Load Cell Input Module in Mitsubishi’s MELSEC-Q series, designed for applications involving weight measurement and force sensing. 

    Input Specifications:
        Analog Input Range: 0.0–3.3 mV/V, suitable for load cells and similar sensors.
        Maximum Input Voltage: ±2.5 V.
        Excitation Voltage: Provides 5V DC ±5% with a maximum output current of 60 mA for load cell excitation.

    Digital Output:
        32-bit signed binary output with a range of 0–10000.
        Supports gross weight output up to a maximum of ±99999.

    Resolution:
        Maximum resolution varies by input range, offering precise readings down to 0.5 µV.

    Isolation: Optical isolation ensures protection against noise interference.
    Current Consumption: 0.48 A.

Installation and Wiring Guidelines

    Grounding: Ensure proper grounding of shielded cables, and keep load cell connections separate from high-noise or high-voltage lines.
    Calibration: Supports two-point calibration to ensure accurate readings.
    Error Indicators: LED indicators signal errors like input signal issues or threshold alarms.

The Q61LD is ideal for high-accuracy weight and force measurement applications, suitable for setups requiring stable analog inputs and robust error detection capabilities.


>> Mitsubishi Q61LD User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi Q61LD and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."