DA200 5.5 kW Servo Set without brake

5.5 kW Set Content :

SV-DA200-5R5-4-E0         : 5.5 KW SERVO DRIVE 220 Volt
SV-MM18-5R5B-4-9A0-1000   : 5.5 KW SERVO MOTOR WITHOUT BRAKE
DAML-250-05-NW0-00        : ENCODER CABLE 5 MT
DBEL-06-05-B0-400         : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE          : 23-BIT ABSOLUTE ENCODER
POWER                 : 5.5 KW
RATED TORQUE          : 35 NM
MAXIMUM TORQUE        : 70 NM
RATED CURRENT         : 12.8 A
MAXIMUM CURRENT       : 25.6 A
RATED SPEED           : 1500 RPM
MAXIMUM SPEED         : 2000 RPM
PROTECTION CLASS      : IP65
OIL SEAL              : Available
KEYWAY                : Available
FLANGE MEASUREMENT    : 180 mm
SHAFT DIAMETER        : 35 mm
LENGHT WITHOUT SHAFT  : 290 mm
LENGHT WITH SHAFT     : 355 mm

Attention ; Lowest power servo in our webshop is 400 watt

- 5.5 KW Servo Set With brake >

- 5.5 KW EtherCAT Set >

- Suitable gearbox for this motor (5.5 KW) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 5.5 .KW Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)