Hi,

In this section, pressure sensor models are used to measure liquid pressure as well as to monitor and control relative system pressure in many process applications. Pressure transmitters provide absolute or differential analog readings over a wide range of measurements.

Water pressure is the force at which water flows through pipes and is measured in pounds per square inch (PSI). The water pressure in a home can affect the flow and function of various appliances and fixtures, such as faucets, showers, and toilets. A water pressure gauge can be used to measure the water pressure in a home, and adjustments can be made to the water pressure regulator to increase or decrease the pressure as needed.

Our models used primarily in water pumps, hydrophores, and other pressure machines consist largely of models that can operate in the range of 0-25 bar. There are some important considerations for our sensors.

    Mounting area: When mounting the product to your machine, the selected model should be compatible with the diameter and thread interval in mm.

    Measurement range: Since there are many types of sensors, you cannot use a 0-10 bar sensor for a machine that requires 12 bar pressure. Even if you use it, it can damage the mechanical hardware and not receive electrical signals.

    Power supply and output type: Some sensor manufacturers are designed to be supplied with a specific voltage, such as 5vdc or 24vdc. We have declared these types of electrical data in the descriptions of all our products.

All pressure sensor models in this section can be directly connected to AC motor speed control devices. If you need pressure stabilization, you can select one of our "Standard Speed Control Devices" inverters from our website and operate it with a sensor model you choose from the list.

 Each model has its own page with detailed information on supply voltages, output types, input types, operating modes, and user manuals.

 Note: Our pressure sensors, like all products on our website, are industrial automation products designed to be used in machines. They are produced with galvanic isolation for potential parasite sources such as frequency drives, power supplies, and small and large induction motors in the same environment.

+ Pump Controller for water

+ Pressure sensors main page

+ All sensor models 

+ PLC system for water control -