VersaMax Nano PLC
Nano is a compact PLC line for basic machine control in limited space; it should not be assumed to share the housing or I/O arrangement of Micro or modular VersaMax.
IC200NAL110 is listed with a 12 V supply and IC200NAL211 with 24 V; both have six digital inputs, one analog input and four relay outputs in the source. Supply voltage is decisive in an installed panel.
Nano may serve a small control task, but its compact body says nothing about electrical interchangeability. Read cabinet supply voltage and the load requirement for relay or transistor outputs separately. Document existing wire numbers instead of relying on similar-looking terminals.
Selection details that matter
Confirm supply, input and output type, and terminal layout from the exact model label.
Model characteristics and roles
IC200NAL110: 6 digital inputs + 1 analog input; 4 relay outputs; 12 V.
IC200NAL211: 6 digital inputs + 1 analog input; 4 relay outputs; 24 V.
IC200NDD010: 6 digital inputs; 4 transistor outputs; 12 V.
IC200NDD101: 6 digital inputs; 4 transistor outputs; 24 V.
IC200NDR001: 6 digital inputs; 4 relay outputs; 24 V.
IC200NDR010: 6 digital inputs; 4 relay outputs; 12 V.
Software and project backup
Proficy Machine Edition / Logic Developer PLC is the principal CPU project environment. Older machines may hold VersaPro or Logicmaster 90 projects; confirm backup format, CPU firmware and software revision before promising migration. VersaMax Nano PLC requires the project target to match the complete hardware designation.
For the backup and version requirements of VersaMax Nano PLC, read Proficy Machine Edition and Logic Developer PLC.
Finding the applicable manual
VersaMax Nano PLC: Covers compact housing, supply and built-in I/O distinctions. Relevant document reference: GFK-1645; declaration of conformity dated 12 Oct 2012.
The document scope and future PDF location for VersaMax Nano PLC are explained in GE-Fanuc PLC and PAC Manuals.
Relevant model codes
Compact PLC: IC200NAL110, IC200NAL211, IC200NDD010, IC200NDD101, IC200NDR001, IC200NDR010.
Where to go next
VersaMax Micro PLC and VersaMax Modular PLC explain the adjacent parts of this system without treating them as interchangeable.
Explore GE-Fanuc products
After reading about VersaMax Nano PLC, you can browse the available listings in the GE-Fanuc second-hand main category. Check each product page for its current availability and condition.