Panasonic FP Sigma motion control

Panasonic FP Sigma motion control

FP Sigma motion control belongs to plc modules and expansion. Input, output, analog, motion and communication modules are not interchangeable; the host CPU and slot arrangement matter.

Compare this page with other PLC Modules and Expansion options, and use the Panasonic systems guide for the wider system.

Function and selection points

These parts extend a PLC system; they are not stand-alone controllers running the CPU program.

Selection check: Match signal type, channel count, slot/cassette arrangement and host CPU.

Technical distinctions in the codes

FPGPP11, FPGPP12, FPGPP21 +4: Pulse or RTEX motion module; axis count depends on the suffix.

Do not choose between similar names alone. Compare FP Sigma communication for another variant and Servo Drives for the adjoining part of the system.

Model codes and project environment

Model codes in this family: FPGPP11 · FPGPP12 · FPGPP21 · FPGPP22 · FPGPN2AN · FPGPN4AN · FPGPN8AN

Review setup, projects and backups alongside Control FPWIN Pro / Pro7. Return to the existing Panasonic category for the current product tree.

Guide trail: FP PLC system and ordering catalogue. Use the edition relevant to the device revision; no PDF download is offered here.

Related pages

PLC Modules and Expansion · Servo Drives · Control FPWIN Pro / Pro7 · existing Panasonic category