IC694MDL740
IC694MDL740 DC Positive Logic Output Module: Reliable Low-Voltage Solution
The IC694MDL740 is a 12/24 Volt DC positive logic output module with a capacity of 0.5 Amps per point, offering a total of 16 output points. These points are divided into two groups of eight, each with a common power output terminal. With its positive logic characteristics, the module sources current to the loads from the user-supplied common or positive power bus. Output devices are connected between the negative power bus and the module terminals. This module is compatible with a wide range of load devices, such as motor starters, solenoids, and indicators. Power to operate the field devices must be supplied by the user.
Each output point has an individual numbered LED to display the ON/OFF status. There are no fuses on this module. The blue bands on the label indicate that the MDL740 is a low-voltage module. It can be installed in any I/O slot within an RX3i system.
Technical Specifications and Performance
Rated Voltage: 12/24 Volts DC
Output Voltage Range: 12 to 24 Volts DC (+20%, -15%)
Number of Outputs: 16 (two groups of eight outputs each)
Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
Output Current: Maximum 0.5 Amps per point, 2 Amps maximum per group
Inrush Current Capacity: 4.78 Amps for 10 ms
Power Consumption: 110 mA (with all outputs on) from the 5-volt bus on the backplane
Output Voltage Drop: 1 Volt maximum
Off-State Leakage Current: 1 mA maximum
On and Off Response Time: Maximum 2 ms
Wiring Connections
The terminal connections for each output are as follows:
Terminal 1: DC +
Terminals 2-9: Outputs 1 to 8
Terminal 10: Common return for outputs 1-8
Terminal 11: DC +
Terminals 12-19: Outputs 9 to 16
Terminal 20: Common return for outputs 9-16
Recommendations and Advice
The IC694MDL740 module provides flexible and reliable control with its low-voltage, positive logic output characteristics, making it suitable for a wide range of industrial automation applications. It is ideal for controlling motor starters, solenoids, and indicator devices. Since the module does not include internal fuses, external fuses are recommended for protection. With fast response times and low leakage current, the module offers efficient and safe operation.
In conclusion, the IC694MDL740 is a robust solution for low-voltage applications, offering long-lasting reliability and flexibility in industrial environments.
>> IC694MDL740 Output modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)