IC694MDL390

IC694MDL390 Isolated AC Output Module: High Voltage and Flexible Control

The IC694MDL390 is a 120/240 Volt AC output module providing five isolated output points, each with a maximum capacity of 2 Amps. Each output has its own separate common, meaning each output circuit is isolated from the others with respect to the AC power source. The commons are not connected inside the module, allowing the outputs to be powered from different phases of the AC supply or the same source. Each output is protected against transient electrical noise by an RC snubber circuit, and the module can handle inrush currents greater than 10 times the rated current.

This module is ideal for controlling a wide range of inductive and incandescent loads. Each output is individually fused with a 3 Amp fuse, and if a fuse blows, the red LED (F) turns on to alert the user. The red bands on the label indicate that the MDL390 is a high-voltage module. It can be installed in any I/O slot in an RX3i system and should be configured as an 8-point output module with programs referencing the five least significant bits.
Technical Specifications and Performance

    Input Voltage: 120/240 Volts AC, 50/60 Hz
    Number of Outputs: 5 isolated outputs
    Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
    Inrush Current Capacity: 25 Amps for one cycle
    Power Consumption: 110 mA (with all outputs on)
    Output Current: Maximum 2 Amps per output, 5 Amps per module at 45°C
    Minimum Load Current: 100 mA
    Output Voltage Drop: 1.5 Volts maximum
    Output Leakage Current: Maximum 3 mA at 120 Volts AC, 6 mA at 240 Volts AC
    On Response Time: 1 ms maximum
    Off Response Time: 1/2 cycle

Fuses

Each output is protected by a 3 Amp fuse (GE Fanuc part number: 44A724627-111). If a fuse blows, the red LED (F) lights up, providing a clear indication to assist with quick troubleshooting.
Wiring Connections

The terminal connections for each output are as follows:

    2 and 4 Terminals: First output and common return
    6 and 8 Terminals: Second output and common return
    10 and 12 Terminals: Third output and common return
    14 and 16 Terminals: Fourth output and common return
    18 and 20 Terminals: Fifth output and common return

Recommendations and Advice

The IC694MDL390 module offers excellent safety and flexibility due to its isolated output circuits. With the ability to operate on different phases or from the same power supply, this module is well-suited for use in industrial automation systems. The RC snubber circuits provide protection in environments with high electrical noise, and if a fuse blows, the LED indicator allows for rapid identification and resolution of issues. The module’s high inrush current capacity also makes it a reliable choice for controlling loads such as motors, transformers, and incandescent lighting.

Overall, the IC694MDL390 is a reliable and durable solution for industrial automation applications, providing high performance and long-term reliability across a variety of demanding environments.

>> IC694MDL390 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL390 Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."