IC694MDL634
IC694MDL634: 24 Volt DC Input Module
IC694MDL634 is a 24-volt DC input module that provides 8 input points, grouped under a common power input terminal. This module can be wired for either positive or negative logic, allowing for flexibility in its configuration. It is compatible with a wide range of input devices such as pushbuttons, limit switches, and electronic proximity switches. When current flows into an input point, it registers as a logic "1" in the input status table (%I).
External power sources must be provided to operate field devices. Depending on the needs of the input devices, they can be powered using the module’s +24V OUT and 0V OUT terminals. The module features 8 green LEDs to display the ON/OFF status of input points 1 through 8. Blue bands on the label indicate that this is a low-voltage module. It can be installed in any I/O slot of an RX3i system.
Technical Specifications:
Rated Voltage: 24 volts DC
Input Voltage Range: 0-30 volts DC
Inputs per Module: 8 (grouped under a single common terminal)
Isolation:
Field to Backplane and Frame Ground: 250 VAC continuous, 1500 VAC for one minute
Input Current: Typically 7 mA
Input Characteristics:
On-state Voltage: 11.5-30 volts DC
Off-state Voltage: 0-5 volts DC
On-state Current: Minimum 3.2 mA
Off-state Current: Maximum 1.1 mA
On Response Time: Typically 7 ms
Off Response Time: Typically 7 ms
Power Consumption:
45 mA from the 5-volt bus (with all inputs on)
62 mA from the isolated 24-volt backplane bus or user-supplied power
Wiring:
Terminals:
Terminal 1 is the common return for inputs 1-8.
Terminals 2-9 are for input connections.
Terminal 18 provides 24V DC output, and Terminal 19 provides 0V output for input devices.
Note: If the 24V OUT pin is used to power input devices in the field, the isolation specification changes to:
Field to Backplane and Frame Ground: 50 VAC continuous, 500 VAC for one minute.
Summary:
The IC694MDL634 is a versatile 24-volt DC input module, offering 8 points of input that can be configured for either positive or negative logic. With compatibility for a variety of input devices and low-voltage operation, this module is ideal for managing DC inputs in industrial applications. It offers flexible power supply options, making it a reliable and adaptable solution for different configurations.
>> IC694MDL634 input modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)