IC694MDL230

IC694MDL230: 120 Volt AC, 8 Point Isolated Input Module
The IC694MDL230 is a 120-volt AC isolated input module that provides 8 isolated input points, each powered by a separate AC power source. Since the inputs are isolated, each one can operate independently with its own power supply. The input circuits are reactive (resistor/capacitor), and when current flows into an input point, it registers as a logic "1" in the input status table (%I).

This module is compatible with a wide variety of input devices, such as pushbuttons, limit switches, and electronic proximity switches. However, the power to operate field devices must be supplied by the user, and this module requires an AC power source; it is not compatible with DC power sources.

The module features 8 green LEDs that display the ON/OFF status for points 1 through 8. Red bands on the label indicate that the IC694MDL230 is a high-voltage module. It can be installed in any I/O slot of an RX3i system.

Technical Specifications:

    Rated Voltage: 120 volts AC, 50/60 Hz
    Input Voltage Range: 0-132 volts AC, 50/60 Hz
    Inputs per Module: 8 (each input point has a separate common terminal)
    Isolation:
        Field to Backplane (optical) and to frame ground: 250 VAC continuous; 1500 VAC for one minute
        Point to Point: 250 VAC continuous; 1500 VAC for one minute
    Input Current: Typically 14.5 mA at rated voltage
    Input Characteristics:
        On-state Voltage: 74 to 132 volts AC
        Off-state Voltage: 0 to 20 volts AC
        On-state Current: Minimum 6 mA
        Off-state Current: Maximum 2.2 mA
        On Response Time: 30 ms maximum
        Off Response Time: 45 ms maximum
    Power Consumption: 60 mA (with all inputs on) from the 5-volt backplane bus

Wiring:

Each input point has a separate return terminal, ensuring proper isolation. The wiring scheme for the module is as follows:

    Terminals: 2, 4, 6, 8, 12, 14, 16, 18 are the input terminals, and 3, 5, 7, 9, 13, 15, 17, 19 are the corresponding return connections.

The IC694MDL230 is a robust 120-volt AC input module with 8 isolated input points, designed for high-voltage environments. It’s ideal for use with a wide range of input devices, providing reliable operation in industrial applications. Since it requires an external power source for field devices, it’s well-suited for environments where flexibility and isolation are critical.

>> IC694MDL230 input modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL230 input modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."