Omron V7 fault codes 3
OH (Heatsink Overheat - Running):
Check load size, V/f pattern setting, intake air temperature, cooling fan operation, and surrounding thermal sources.
OH9 (Motor Overheating - Running):
Similar checks and actions as OH8.
RH (Externally-Mounting-Type Braking Resistor Overheat):
Increase deceleration time and reduce regenerative load.
OL1 (Motor Overload):
Check load size, V/f pattern setting, motor rated current, and ensure settings for motor protection and time constant are correct.
OL2 (Inverter Overload):
Similar checks and actions as OL1, with additional checks for Inverter capacity.
OL3 (Overtorque Detection - Running):
Similar checks and actions as OL3, with additional checks for operating conditions and load size.
PF (Main Circuit Voltage Fault):
Check for open phase of input supply, momentary power loss, fluctuation in input supply voltage, and unbalanced line voltage.
LF (Output Open Phase):
Check for disconnection in output cable, motor windings, and loose output terminal screws.