OCS Operator Control Stations
OCS combines operator interface and control functions in one platform. Treating it only as a display or only as a PLC misses essential integration details.
OCS100 and OCS110 are documented as operator control stations with displays. In an application, the display, local control and any SmartStack expansion need to be specified together.
An OCS can present information and execute control logic. Saving a screen image is therefore not the same as backing up the control application and I/O map. If SmartStack modules are installed, include their exact codes in the replacement plan.
Selection details that matter
Separate display, built-in I/O, SmartStack expansion and Cscape project revision by model.
Software and project backup
Cscape handles OCS/MiniOCS/MiniRCS projects and related I/O configuration. Do not assume identical targets for a display-equipped OCS and a screenless RCS; inspect SmartStack and software version. OCS Operator Control Stations requires the project target to match the complete hardware designation.
For the backup and version requirements of OCS Operator Control Stations, read Cscape for OCS and MiniOCS.
Finding the applicable manual
OCS Operator Control Stations: Distinguishes units combining an operator display and controller from screenless units. Relevant document reference: GFA-280A; GFK-1687B.
The document scope and future PDF location for OCS Operator Control Stations are explained in GE-Fanuc PLC and PAC Manuals.
Relevant model codes
HMI and controller: OCS100, OCS110, OCS200, OCS210, OCS250, OCS300.
Where to go next
MiniOCS and MiniRCS and PACMotion Control Modules explain the adjacent parts of this system without treating them as interchangeable.
Explore GE-Fanuc products
After reading about OCS Operator Control Stations, you can browse the available listings in the GE-Fanuc second-hand main category. Check each product page for its current availability and condition.