DA200 4.4 kW Servo Set without brake

4.4 kW Set Content :

SV-DA200-4R4-4-E0                   : 4.4 KW SERVO DRIVE 220 Volt
SV-MM18-4R4B-4-9A0-1000    : 4.4 KW SERVO MOTOR WITHOUT BRAKE
DAML-250-05-NW0-00             : ENCODER CABLE 5 MT
DBEL-06-05-B0-400                  : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                      : 23-BIT ABSOLUTE ENCODER
POWER                                    : 4.4 KW
RATED TORQUE                      : 28 NM
MAXIMUM TORQUE               : 68 NM
RATED CURRENT                     : 10.3 A
MAXIMUM CURRENT              : 25.7 A
RATED SPEED                          : 1500 RPM
MAXIMUM SPEED                   : 2000 RPM
PROTECTION CLASS               : IP65
OIL SEAL                                  : Available
KEYWAY                                   : Available
FLANGE MEASUREMENT      : 180 mm
SHAFT DIAMETER                  : 35 mm
LENGHT WITHOUT SHAFT    : 260 mm
LENGHT WITH SHAFT            : 325 mm

Attention ; Lowest power servo in our webshop is 4.4 kw

- 4.4 KW Servo Set With brake >

- 4.4 KW EtherCAT Set >

- Suitable gearbox for this motor (4.4 KW) >

- One size higher servo (5.5 KW) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 1 KW Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)