DA200 2 kW Servo Set without brake

2 kW Set Content :

SV-DA200-2R0-4-E0                : 2 KW SERVO DRIVE 220 Volt
SV-MM13-2R0E-4-9A0-1000  : 2 KW SERVO MOTOR WITHOUT BRAKE
DAML-150-05-BB0-00             : ENCODER CABLE 5 MT
DBEL-06-05-B0-0400               : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                     : 23-BIT ABSOLUTE ENKODER
POWER                                   : 2 KW
RATED TORQUE                    : 9.55 NM
MAXIMUM TORQUE             : 28.6 NM
RATED CURRENT                  : 9.5 A
MAXIMUM CURRENT           : 28.5 A
RATED SPEED                        : 2000 RPM
MAXIMUM SPEED                 : 3000 RPM
PROTECTION CLASS             : IP65
OIL SEAL                                 : Available
KEYWAY                                  : Available
FLANGE MEASUREMENT      : 130 mm
SHAFT DIAMETER                  : 22 mm
LENGHT WITHOUT SHAFT    : 175 mm
LENGHT WITH SHAFT             : 230 mm

Attention ; Lowest power servo in our webshop is 2 kw

 - 2 KW Servo Set With brake >

 - 2 KW EtherCAT Set >

 - Suitable gearbox for this motor (2 KW) >

 - One size higher servo (3 KW) >

 - İnvt servo Main Page -

 - İnvt Main Page -

 + 2 KW Servo motor drawings (pdf)

 + İnvt DA200 Servo user manual >

 + İnvt servo error codes and solutions >

 + Servo instolation and useful documents >

 + İnvt servo PC software (zip)